RM-22

Although the RM-22 is priced to compete with affordable mobile DJ mixers, we did not compromise on the audio quality making it a worthy member of Stanton's Superior Sound Technology™ series. The RM-22 features audio specifications and internal construction that rivals mobile and small club mixers costing three to four times as much

Key Features:

• Balanced Master Output

• Fully Assignable Crossfader

• Gain control with clip LED on each channel

• Dual 7 band EQ with ON/OFF switch

• Mics 1 and 2 feature 2 band EQ plus ON/OFF and Talkover function

• Fader Start

• Cue section features PFL, cue pan, stereo/split, and 2 headphone outputs

• Master output with mono/stereo switch

• Zone and Booth outputs

• Output LEDs switchable between Master and Zone

• 3 phono, 9 line, and 3 mic inputs

SST™ - Superior Sound Technology

• Ultra Low Noise Circuitry

• No Bleed Through

• Low Distortion

Specifications for the RM-22

Description	Measurement
Frequency Response	20 Hz to 20 kHz +1 dB
THD+N (Line)	> 0.005 % at 1 kHz
Signal to Noise Ratio (ref: max level)	> 109 dB (main signal path)
Noise	-98 dBV (Line input to any output)
Crosstalk (Line to Line, Phono to Line, Line to Phono)	> -90 dB
Fader Kill	> -90 dB
Microphone EQ	Hi, Low +/-10 dB
Graphic EQ (7 band stereo)	40 Hz, 80 Hz, 160 Hz, 500 Hz, 1.6 kHz, 3.2 kHz, 6.4 kHz +/-10 dB

Line Inputs	7 (RCA) , 1 (1/4" Balanced) -10 dBV / >10 kOhm
Phono Inputs	2 (RCA), -50 dBV / 47 kOhm
Phono / CD	1 (RCA), -50 dBV (Phono) -10 dBV (Line) / 47 kOhm
Mic Inputs	2 (1/4"), 1 (XLR) -50 dBV / 2.4 kOhm
Master Outputs	2 (1/4") Balanced/ (RCA) unbalanced, +4 dBu balanced / -10 dBV unbalanced
Zone Output	2 (RCA) unbalanced / -10 dBV
Booth Output	2 (RCA) unbalanced / -10 dBV
Record Output	2 (RCA) unbalanced / -10 dBV
Headphone Output	1 (1/4 inch), 1 (1/8 inch)greater than 32 Ohm load
Dimensions (LxWxD)	18.9 in. x 8.66 in. x 4.72 in. (48 cm. x 22 cm. x 12 cm.)
Weight	4.5 kg (9.9 lbs)