RM-100

The RM-100 is Stanton's long awaited first 19" rack mount mixer. Stanton paid attention to every detail to make sure this fully loaded mixer packs all the latest and greatest features as well as great sound quality thanks to its master XLR balanced connectors. The RM-100 has an effects loop which lets you easily add effects or sampling to your mix. This mixer is ideal for club DJ's, mobile DJ's, as well as remixers and producers. Check-out all the features.

• 4 Channel stereo preamp mixer

• 9 line and 4 phono inputs

• 3 mic inputs (combo and 1/4" connectors)

• Gain and 3 band EQ (+9/-26 dB) per channel

• Effects send and return assignable to master out, each channel (including all mics), and headphones for monitoring

• Mic channel features 2 band EQ, independent level controls, ON/OFF switch, and VCA controlled autotalk function

• Sub-mic on channel 4 enables use of 3 band EQ and panning

• Fader start

• Fully assignable crossfader (A, B, bypass)

• Master section with level and balance controls and mono/stereo switch

• Beat indicators

• Balanced XLR master output

• Booth output

• Cue section features, stereo/split function, cue pan and level control

• Cue pan fader is assignable to booth output for in-booth monitoring

• Input and output LED meters

• 12V light BNC input

Specifications for the RM-100

Description	Measurement
Input Level / Input Impedance :	Mic 1.5mv/3k ohm, Phono 3mv/47k, Line 150mv/27k ohm
Output Level / Output Impedance :	Master 1.24v/100 ohm, Booth 1.24v/100 ohm, Rec 245mv/100 ohm
Gain :	20dB
Tone :	-26/+9dB (Hi, Mid, Low)
Frequency Response :	20Hz - 20KHz +/-2dB
Distortion :	Less 0.2%
S/N Ratio :	Less 70dB
Crosstalk :	Less 60dB
Autotalk :	0~ -26dB
Beat :	80Hz
Aux:	FX send : 0dB (0.775mV) FX return : 150mV
Light :	DC 12V
Power Supply :	AC15V 500mA, AC12V 700mA
Dimensions :	19"(W) x 10.5"(H) x 3.5"(D) 482mm(W) x 264mm(H) x 90mm(D) (6U