AUTO BEAT
EFFECTOR
Linked to BPM, the DJM-600 can add effects to each CH, MIC and
MASTER independently. The user can produce music that makes full
use of high-level DJ techniques by performing quick setting with
the Beat Unit Switch button, adjusting the precise time
parameters, or controlling the balance between the effect sounds
and the original sounds by varying the mix ratio. Moreover, even
when using the fader, it is possible to leave just the effect
sounds without linking to BPM.
|
DELAY: Repeats a sound once. The user can
set the delay to their desired tempo.
ECHO: Repeats a sound several times. The user can set the
echo sound to their desired tempo.
AUTO PAN: Automatically shifts the sound to the right and
left. Also capable of short auto pan sequences that would be
impossible via manual operation.
AUTO TRANS :
Periodically cuts the sound.
AUTO FILTER:
Periodically varies the sound color.
FLANGER: Periodically reproduces a sound effect resembling a
jet airplane ascending and descending.
REVERB: Reproduces a reverberating sound effect.
PITCH SHIFTER: Allows the interval to be freely varied
throughout a range of +/-1 octave. With this, the user can
compensate for interval changes when using analog turntables or
for tempo changes when different makers' CD players are used.
Additionally, choruses can be made by employing mix ratios.
EXTERNAL EFFECT INPUT (SEND/RETURN): Allows the user to
connect the mixer to an external effector or sampler, etc. |
|
|
