If needed, additional tubing may be ordered. Tubing may be cut at any location,
or spacing may be added between connectors.

Simply push the connectors into the next tubing for quick assembly of the
nozzles with 26" space between them. To add additional lines anywhere
simply cut the tubing and add a 3-way connector to go in another direction. This
entire unit can be assembled in 15 minutes without assistance from a plumber!
It's quick, it's easy and it is always adjustable.
|
|
JUNGLE
MIST SR.
Anti-Drip System
(150 heavy or 200 fine)
System includes:
-
Pump - 5hp 220vac, 28 amps,
single phase (3 phase additional),
60 hz (50 hz additional)
(quiet pulley drive)
4.89 gpm @ 800 psi
-
2 x Solenoids
(instant on/off controls)
-
1 x Filter with hose attachment
-
150-200 Anti-Drip nozzles
with tubing. 28" (.6m)
-
3 x 100' Tubing 3/8" OD (33m)
-
1 x 50' Tubing 3/8" OD (33m)
-
20 End plugs
-
1 Tubing cutter & 1 taper tubing cutter
-
15 x 90° Elbow
-
15 x 3/ways
-
375 x Clamps or straps
-
1 x 6' HPDB2 Female hose
-
1 x 8oz. Nozzle cleaner
|