Functions
That Push DJ Sound to The Limit
Auto BPM Counter - Only From Pioneer
Let the digital readout confirm what you already know by ear. The
Beats-Per-Minute Counter measures the BPM of virtually all kinds of
dance music, enabling you to check the tempo at a glance. Linking widely
differing types of music is easier than ever with the Auto BPM Counter.
Auto BPM & Effects
DELAY
A single repeat of 1/2, 3/4 and 1/1 beat music can be
overlaid over a track. For example, with 1/2 Beat Delay, four beats will
be increased to eight, while using the 3/4 Beat Delay produces a
"leap sound" effect.
ECHO
Repeatedly overlaying beats of 1/2, 3/4 and 1/1 is simple. Cutting
in 1/1 beat Echo can create an intriguing fade to the beat; applying it
to the mike causes microphone output to be reproduced repeatedly to the
same beat.
AUTO PAN
The left-right balance can be changed automatically to the rhythm as
rapidly as you like. Auto Pan can do rhythmic switches too quick for
human operators.
FLANGER
Switching to the Flanger effect produces synthesizer tones quickly
and easily.
Other Effect Features
PITCH SHIFTER
The Pitch Shifter
corrects for changes in pitch within a range of +/- 1 octave when using
analog turntables or other vendors' CD players. Used with the mic, the
Pitch Shifter can alter voices.
REVERB
A variety of reverberation effects are available.
SEND/RETURN
Your samplers and peripherals are easily connected to the DJM-500.
Effect On/Off
With one touch of the Effect On/Off button,
effects are linked to the rhythm
EQ For Each Channel
The DJM-500 features a 3-band independent EQ
for each channel, allowing for simple correction, emphasis or even
elimination of different sound characteristics.
Peak Level Meter For Each
Channel
Source input levels are given instantly for
each channel.
Beat Indicator
The indicator lamps tell you when the beat you
want is linked to the Auto BPM.
A Great Match For The CDJ
Series
Fader Start Play
Connecting the DJM-500 to the CDJ Series
allows you to take advantage of Fader Start Play; by increasing the
Fader on the mixer, the player will automatically override the Pause
control and start the music immediately. Fader Start Play also works
during Cross Fading, an industry first that brings out the best in
sampler-style music.
Fader Back Cue Play
When the DJM-500 is used with the CDJ Series (excluding
CDJ-50OG and CDJ-500), the Fader or Cross Fader controls can also return
you automatically to a designated cue point if desired. By fading Cross
Fader back and forth or Fader up and down quickly, you can give the
"essence" of scratching a certain point on a vinyl record.
Pioneer Gives You More
Designed For Professionals
Two MIC inputs: MAIN located on top panel, SUB
on rear panel.
Other inputs: 2 CD, 2 LINE, 3 PHONO.
Monitor EQ: The bass tone can be adjusted to your optimum level to set
your favorite beat in the mid or high range.
Independent Monitor Selection Switch: Monitor any channel input or
effect independently or simultaneously.
BOOTH MONITOR LEVEL: Adjusts the volume for a separate DJ booth
monitoring system.
BALANCED output: Direct connection to an amplifier.
PHONES output: Located on top panel.
TRIM: Separate controls for each channel. |
| Specifications |
| Input Terminals |
CD x 2 (RCA),
Phone x 3 (RCA), Line x 2 (RCA)
Mic x 2 (XLR x 1, 1/4" Phone x 1) |
| Output Terminals |
Master Out x 3
(RCA / XLR / 1/4" Phone),
Booth Monitor x 1 (RCA),
Headphone Monitor x 1 (1/4" Phone) |
| Other Terminals |
Send x 1
(1/4" Phone x 2), Return x 1 (1/4" Phone x 2) |
| Frequency Response: |
20 Hz-20kHz (CD) |
| Signal-to-Noise Ratio: |
85db dB or more (RCA) |
| Total Harmonic Distortion: |
0.02% or less (CD) |
| Audio Output: |
1.0V |
| Power
Requirements: |
AC 120V, 60 Hz |
| Power Consumption: |
41 W |
| Net Weight: |
13 lbs
(5.9 kg) |
| Dimensions (WxHxD): |
320x107x357.4 mm (12-3/8 x
4-3/16 x 14-1/16 inch) |
|
