Reviews

Thank you DJ Depot!!

Thank you DJ Depot!! The lights arrived on time for my wedding last Saturday! Thank you!!


text_stars
Brett F
HAL3S by Rane
HAL3S by RaneHAL3S by Rane
HAL3S by Rane
Brand:Rane
Product Code: HAL3S
Submit Price Match
List Price: $1,299.00
Price: $999.00
You Save: $300.00 (23%)
Qty:  

HAL3S by Rane

The RANE HAL3s is a digital processor for audio systems. This groundbreaking architecture is used for room combining, paging and distributing audio to several zones in an installation. Utilizing Halogen software, even novice users are guided through what used to be complex tasks in just minutes. No intricate matrix mixing or presets are required for room combining and paging. No complex wiring is required to distribute pages and background music to multiple zones. Seamlessly interface HAL to small or large installations with web controls, (no app required) and/or a broad variety of peripheral devices including smart Digital Remotes (DRs), Remote Audio Devices (RADs), portable or rack automixers, small remote amplifiers, and an advanced Paging Station. In addition, the HAL3s Multiprocessor and Halogen software check the status, location, CAT 5e wiring integrity, and that audio is flowing in all peripheral devices, so you know your system is properly connected and ready to go.

Features:

  • 6-in 10-out system: 2x6 analog & 4x4 expansion (via RAD ports)
  • 2 Mic/Line, Line-plus inputs with 48V phantom power
  • Supports up to 2 remote audio devices (RADs) and 2 digital remotes (DRs) or 4 digital remotes (DRs)
  • 4 logic inputs for contact closure control
  • Front panel signal and overload indicators
  • Supports control via web browser
  • Event manager for time-of-day event control
  • 108dB dynamic range


Package Contents:

  • HAL3s
  • Euroblock connectors
  • Cat-5e cable
  • IEC power cable


Specifications:

Parameter:
Analog: I/O  2 x 6 2 Mic/Line/Line-plus Inputs, 6 Line Outputs
Connectors: Euroblock 4 x 6-pin, 5mm pitch, Green = Inputs, Orange = Outputs
CODEC: 24-bit, 48kHz
 
All Inputs:
Input Impedance:  2.9kΩ  1%  Each leg to ground
Inter-channel isolation:  >100dB  typ  20Hz–20kHz, unity gain, channel-to-channel
CMRR:  55dB  min  1kHz
Inputs: Dynamic Mic Mode  Active Balanced Microphone input mode without phantom power
Gain:  +30dB to +50dB  typ  +30db (analog gain), 1dB steps to +50dB (digital gain)
THD+N:  < 0.005%  typ  20Hz–20kHz, +4dBu out, 0dB digital gain
Equivalent Input Noise:  -120dBu  typ  20Hz–20kHz, 150Ω source, 30dB gain
Maximum Input:  -18dBV (125mVrms)  typ  1kHz, < 0.01% THD+N
Frequency Response:  20Hz–20kHz, +0.0/-0.3dB +4dBu out, 100kΩ load, Mic Input to Output
Inputs: Condenser Mic Mode  Active Balanced Microphone input mode with 48V phantom power
Gain:  +18dB to +38dB  typ  +18dB (analog gain), 1dB steps to +38dB (digital gain)
Phantom Power:  +48VDC 10mA max per input
THD+N:  < 0.005%  typ  20Hz–20kHz, +4dBu out, 0dB digital gain
Equivalent Input Noise:  -110dBu  typ  20Hz–20kHz, 150Ω source, 18dB gain
Maximum Input:  -6dBV (500mVrms)  typ  1kHz, < 0.01% THD+N
Frequency Response:  20Hz–20kHz, +0.0/-0.3dB +4dBu out, 100kΩ load, Mic Input to Output
Inputs: Line+ Mode  Active Summer Left ("+") and Right ("-") signals summed to mono
Gain:  0dB to +20dB  typ  0dB (analog gain), 1dB steps to +20dB (digital gain)
THD+N:  < 0.007 %  typ  20Hz–20kHz, +4dBu out, 0dB digital gain
Maximum Input:  +14dBu  typ  1kHz, < 0.01% THD+N, each leg
Frequency Response:  20Hz–20kHz, +0.0/-0.3dB +4dBu out, 100kΩ load, Line-plus Input to Output
Dynamic Range (in to out):  108dB  max  re +20dBu, 20kHz BW, A weighted, Rs = 50Ω
Inputs: Line Mode  Active Balanced Balanced line level input
Gain:  0dB  typ  0dB (analog gain), 1dB steps to +20dB (digital gain)
THD+N:  < 0.005%  typ  20Hz–20kHz, +4dBu out, 0dB digital gain
Maximum Input:  +14dBu  typ  1kHz, < 0.01% THD+N
Frequency Response:  20Hz–20kHz, +0.0/-0.3dB +4dBu out, 100kΩ load, Line Input to Output
Dynamic Range (in to out):  108dB  max  re +20dBu, 20kHz BW, A weighted, Rs = 50Ω

Outputs  Active Balanced:
Impedance:  200Ω  1%  Each leg
Maximum Output:  +20.0/+15.5dBu  typ  1kHz, 100kΩ/600Ω load

Indicators:
Signal:  -50dBFS  typ  Green LED, peak-reading
Overload:  -0.5dBFS  typ  Red LED, peak-reading

Propagation Delays:
RAD In to RAD Out  1.71ms  typ  Tested with RAD23
RAD In to Analog Out  1.85ms  typ  
Analog In to RAD Out  2.25ms  typ  
Analog In to Analog Out  2.39ms  typ  

DSP:  
Processing Power  2400MIPS  max  1DSP @ 300MHz with up to 8 instructions/cycle
Word Length  32/64-bit Floating Point
Delay Memory  20 seconds  max  

Computer Interface:
Type  Ethernet 1000 Base-T Zeroconf service discovery protocol for easy set up
Cable  Shielded CAT 5e or better RJ-45 connector
Length  100 meters/300 feet  max  Standard Ethernet cable length limit

RAD Port:
2 RJ-45 connectors
Audio Channels:  2 in x 2 out Each port 2 in x 2 out, control channel, 24-bit, 48kHz
Power:  24VDC @ 100mA  max  Each port
Length:  152 meters / 500 feet  max  Shielded CAT 5e cable or better

DR Ports:
4 RJ-45 connectors
Power:  24VDC @ 50mA  max  Each port
Length:  300 meters / 1000 feet  max  Shielded CAT 5e cable or better

Logic Inputs:  4
Connector:  Mini Euroblock 6-pin, 3.81mm pitch, Black
Internal Pull-up:  51.1kΩ, 5.0V Protected to +24V, reverse polarity protected
Vin High:  > 2.2V  min  Normal state
Vin Low:  < 0.7V  max  External circuit sinks > 22µA to assert

Wiring:  Class 2 All rear panel terminals
Power Requirement:  100 to 240VAC 50/60Hz, 20W max
Ambient Room Temp.:  40°C  max  Maximum external loading
Unit: Conformity:  CE, FCC, cCSAus
Unit: Size:  1.73"H x 19"W x 8.25"D (4.4cm x 48.3cm x 20.9cm)
Weight:  4.75 lb. (2.2 kg)
Shipping: Size  4.25" x 20.3" x 13.75" (11cm x 52cm x 35cm)
Weight:  9 lb. (3.8 kg)

Any reproduction without consent is prohibited.  Specifications, descriptions and pricing subject to change without notice. All pricing is in US$.  We are not responsible for typographical errors. All products subject to available stock. Copyright 1997-2020, DJ Depot   All rights reserved.