Reviews

As the founder of the Oregon School..

As the founder of the Oregon School for the Deaf haunted house, the Nightmare Factory, allow me to thank you for your fast service, and great prices on the products we have ordered thus far. I have been more than please with everything, and have started recommending you to my fellow haunters. As a matter of fact as soon as I get a chance I'd like to put a link to your site on our web page. Once again, it has been a pleasure so far dealing with you, I look forward to a long relationship.


text_stars
E Roberts
Crown MA9000I Macro Tech I Series Amplifier
Crown MA9000I Macro Tech I Series Amplifier
Brand:Crown
Product Code: MA9000I
Submit Price Match
List Price: $7,280.00
Price: $5,263.80
You Save: $2,016.20 (28%)
Qty:  

Crown MA9000I Macro Tech I Series Amplifier

  • The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else

  • Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste

  • Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road

  • Global Power Supply - designed to deliver maximum power no matter what country you work in

  • Built-in load, line voltage, input and output monitoring

  • Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location

Power Output
Guaranteed minimum power in watts at 20 Hz-20 kHz with 0.35% THD
 
2-ohm Dual (per ch.)
4-ohm Dual
(per ch)
8-ohm Dual
(per ch)
4-ohm
Bridge
8-ohm
Bridge
20 mS
BURST
20 Hz - 20
kHz
1 kHz
MA-5000i
3,000W
2,000W
2,500W
2,500W
1,250W
4,000W
5,000W
MA-9000i
4,700W
2,800W
2,800W
3,500W
1,500W
5,600W
7,000W
MA-12000i
6,000W
3,750W
3,750W
4,500W
2,100W
7,500W
9,000W
Performance
Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms)
± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power,
A-weighted
> 108 dB
Total Harmonic Distortion (THD) at 1 watt into 8 ohms
< 0.1%
Total Harmonic Distortion (THD) Plus Noise at full rated power
< 0.35%, 20 Hz to 20 kHz
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -30 dB
< 0.35%
Damping Factor (20 Hz to 100 Hz at 8 ohms)
> 5000
Crosstalk (below rated power, 20 Hz to 1 kHz)
> 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)
> 55 dB, typically > 70 dB
DC Output Offset (Shorted input)
< ± 3 mV
Input Impedance (nominal)
10 kilohms balanced, 5 kilohms unbalanced
Maximum Input Level
+20 dBu typical
Load Impedance (Note: Safe with all types of loads)
Stereo: 1/2/4/8/16 ohms     Bridge Mono: 2/4/8 ohms
Input Sensitivity (referenced to 8 ohm rated output)
1.4V, 32 dB gain, and 26 dB gain
Voltage Gain (referenced to 8 ohm rated output)
MAi-5000i:
37.1 dB to 22.2 dB
MAi-9000i:
37.9 dB to 23.0 dB
MAi-12000i:
39.3 dB to 24.5 dB
Required AC Mains
Universal AC input, 100-240VAC , 50/60 Hz (±10%). Maximum AC mains voltage 264VAC.
AC Line Connector
Five cordsets supplied with amplifier (USA, UK, European, Australia, India)
Construction
Cooling
Dual-zone, microprocessor controlled, continuously variable speed fans,
front-to-back airflow
Front Panel
Cast aluminum with integrated handles.
Weight
28 pounds (12.7 kg) net, 36 pounds (16.3 kg) shipping.
Dimensions (W x H x D)
19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D.
Protection
Amplifier is protected against reactive loads, faults and shorts. If one channel experiences a catastrophic failure, the entire amplifier will shut down.
Any reproduction without consent is prohibited.  Specifications, descriptions and pricing subject to change without notice. All pricing is in US$.  We are not responsible for typographical errors. All products subject to available stock. Copyright 2015, DJ Depot   All rights reserved.