loyal customer for 4 yearsIf you are a potential customer do not hesitate even once to shop at DJ Depot. I have been a loyal customer for 4 years. I now have 5 different set-ups total for my DJ service and all my equipment was purchased here! ![]() Pete G |
- BSS DSP processing with IIR filters and linear phase FIR filters
- LCD screen provides diagnostics and preset selection to ensure fast and easy system and network setup
- Covered by five patents
- Fan has true tachometerfeedback for fan fault protection and precise control over thermal performance, so the amp runs longer and harder than the competition
- Includes SLM (Sweep Load Monitoring) with system-level diagnostics
- Global Power Supply designed to deliver maximum power no matter where your schedule takes you. Universal AC input accepts100-240VAC, 50/60 Hz (+/-10%).
- Front-panel USB connector transfers presets to/from a USB drive to the amps DSP
- New software interface based on customer feedback manages presets, provides easier system-level changes, and includes a configuration wizard
- The only product available with analog, AES/EBU, CobraNet, HiQnet and Ethernet connectivity
- User definable front-panel security feature
- Professional-grade connectors for all inputs and outputs
- Full power-supply voltage is always available, allowing instantaneous power on demand
- Quality-graded components let you safely drive the amplifier harder
- More total capacitance provides tremendous energy reserves for power bursts
- Highest output voltage in the industry (200V peak) provides clean transient peaks
- Ultra smooth processing by onboard high-definition BSS Omnidrive HDDSP with 24-bit,192 kHz Cirrus Logic SHARC A/D and D/A converters.World-class FIR and IIR filters.
- LevelMAX™ peak voltage and RMS power limiters communicate with each other, resulting in smooth and accurate response, better sound, higher SPL
- True Ethernet backbone -fast, reliable and scalable
- High common-mode rejection eliminates hum and RFI on input cables
- 5th-generation patented Class-I (BCA®) circuitry couples power efficiently to the load and provides low AC current draw
Power Output Guaranteed minimum power in watts at 20 Hz-20 kHz with 0.35% THD | |||||||
2-ohm Dual (per ch.) | 4-ohm Dual (per ch) | 8-ohm Dual (per ch) | 4-ohm Bridge | 8-ohm Bridge | |||
20 mS BURST | 20 Hz - 20 kHz | 1 kHz | |||||
I-T5000 HD | 3,000W | 2,000W | 2,000W | 2,500W | 1,250W | 4,000W | 5,000W |
I-T9000 HD | 4,700W | 2,800W | 2,800W | 3,500W | 1,500W | 5,600W | 7,000W |
I-T12000 HD | 6,000W | 3,750W | 3,750W | 4,500W | 2,100W | 7,500W | 9,000W |