Your shopping cart is empty!
Reviews
loyal customer for 4 yearsIf you are a potential customer do not hesitate even once to shop at DJ Depot. I have been a loyal customer for 4 years. I now have 5 different set-ups total for my DJ service and all my equipment was purchased here!  Pete G |
Crown DSI-2000 Power Amplifier w/DSP
List Price: $1,656.20
Price: $1,279.41
You Save: $376.79 (23%)
Price: $1,279.41
You Save: $376.79 (23%)
Qty:
Crown DSI-2000 Power Amplifier w/DSP
Engineered from the ground up for unmatched quality and performance, the Crown® DSi Series of power amplifiers offers three models of 500W, 800W, and 1200W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and the new DSi-8M System Monitor. At the touch of a button, Crowns DSi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray® system, making this the ultimate cinema solution.
- Includes three models of 500W, 800W, and 1200W per channel at 4 ohms
- Automatic presets for popular JBL cinema speaker systems for quick, easy configuration
- Intuitive front-panel LCD screen guides installers through setup
- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
- Computer connectivity via USB allows fast setup and configuration with HiQnet™ System Architect™ software
- Rear-panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and new DSi-8M System Monitor
- Switch-mode universal power supply
- All products fill 2U rack spaces and weigh under 19 pounds
- Barrier strip outputs, removable Phoenix-style input
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
| Minimum Guaranteed Power, 1 kHz | DSi 1000 | DSi 2000 | DSi 4000 |
| Per channel, both channels driven | |||
| Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 4 ohms Bridge-Mono, 8 ohms | 700W-† 475W 275W 1,400W-† 950W | 1,000W- 800W 475W 2,000W- 1,600W | 1,450W- 1,200W 650W 3,000W- 2,400W |
With 0.5% THD | |||
| Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) | +0/-1 dB |
| Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) | 100 dB |
| Damping Factor (8 ohm): 20 Hz to 400 Hz | > 500 |
| Input Stage | Input is electronically balanced and employs precision 1% resistors |
| AC Line Current | DSi 1000: 11.56A,DSi 2000: 11.93A, DSi 4000: 11.75A. At idle: Draws no more than 45 watts. |
| Crosstalk (below rated power) 20 Hz to 1 kHz | > 70 dB |
| Input Impedance (nominal) | 20 kilohms balanced, 10 kilohms unbalanced |
| Load impedance (note: safe with all types of loads) Dual Bridge mono | 2-8 ohms (4-8 ohms in DSi 1000 A1 100V versions) 4-16 ohms (8-16 ohms in DSi 1000 A1 100V versions) |
| Voltage Gain (at 1 kHz) | DSi 1000: 30.5 dB, DSi 2000: 32.9 dB, DSi 4000: 34.2 dB |
| Sensitivity (at 8 ohm rated output) | 1.4V |
| Operating Temperature | 0 degrees C to 40 degrees C at 95% relative humidity (non-condensing) |
| AC Line Voltage and Frequency Configurations Available (± 10%) | 100V, 120V-240V, 50/60 Hz |
| Ventilation | Flow-through ventilation from front to back |
| Cooling | Heat sinks and proportional-speed fan |
| Dimensions: Width, Height, Depth (behind mounting surface) | EIA Standard 19" W (EIA RS-310-B) x 3.5” (8.9 cm) H x12.25" (31.1cm) D |
| Net Weight, Shipping Weight | 19 lb (8.6 kg), 22 lb (10.0 kg) |
