| V1001 Plus
Rugged professional power amplifier
Output Power:
• 2 ohms, 1 khz 1% THD 450W RMS per channel
• 4 ohms, 1 khz 1% THD 350W RMS per channel
• 8 ohms, 1 khz 1% THD 230W RMS per channel (Bridged Mode, mono)
• 4 ohms, 1 khz 1% THD 890W RMS per channel
• 8 ohms, 1 khz 1% THD 700W RMS per channel
Total Harmonic Distortion (THD):
• Less than 0.1% (20Hz-20kHz, @ 8 Ohms)
Input Sensitivity & Impedance:
• 1.0v rms (0 dBv) (@ 4 Ohms)
Dimensions & Weight:
• Height : 3.5” (88cm)
• Width: 19” (48.3cm)
• Depth: 15.9” (40.5cm)
• Weight: 26.4 lbs (12 kg)
Frequency Response:
• ±.5dB, 1W RMS 8 ohms (10Hz - 28 kHz)
• ±3dB, 1W RMS 8 ohms (5Hz - 80 kHz)
Hum & Noise:
• 100 dB, unweighted (@ 8 Ohms)
Signal to Noise Ratio:
• 104 dB , unweighted (@ 4 ohms full power) “A” Weighted
Slew Rate:
• 90v/usec
Damping Factor:
• 240 (@ 8 Ohms)
Protection Circuit:
• DC output protection, Overload protection
• Short circuit protection, On & Off protection
Special Features:
• Front panel reset
Power Consumption:
• 5A @ 120V AC (@ 8 Ohms)
Turn-On Thump Protection:
• Yes
Cooling System:
• Dual 1 speed fans & heatsink | 
